|
The first thing you have to perform when measuring for mini blinds is to know if you require inside or outside mount. Inside mounts fit the mini blinds within your window frames. On the other hand, outside mounts fit the window opening overlap. Inside mount – First step in measuring for mini blinds To determine the needed width, measure the exact distances between the frame’s interior surfaces above, in the middle and below, then utilize the narrowest measured width. To get the length of the window mini blinds, you have to get the precise distance from the interior surface at the window top of the window up to the sill underneath, at the right, middle and left points. The longest length measurement will be used. Should you like to option of your blinds not touching the sill, then you need to deduct around ¼ inch. In the absence of sill, you must take the length measurement up to point that blinds should reach. Outside mount measuring for mini blinds To get width, measure the precise distance between the most exterior points where you blinds will be positioned. If you intend to have complete control of lighting, the measurement you get should have ¾ inch extension over the opening of the window on both sides. To obtain the length, get the precise distance from the point where the top are is to be positioned down to the window sill top. Measuring for mini blinds is an important as the obtained measurements are required when we order our window mini blinds. Most manufacturers deduct for brackets themselves. This means that you will only have to take care of installation once they are delivered to you. For interesting articles on window mini blinds and mini blind installation, visit our Mini Blinds Stuff blog.
Related Articles -
measuring, mini, blinds, window, measurement, mount,
|
