Gardening is an amazing way to keep yourself engaged and stay connected to nature. And according to avid gardeners, a beautiful lush green spot is only complete when you add a water feature to it. It can be a beautiful fountain or a luxurious pond. The tranquillity and serenity that a pretty water feature adds to any space are undeniable. Plus it is a great way to attract wildlife. It will also reduce the unwanted noise from the neighbourhood. Think of the calm mornings and relaxing evenings you can spend in front of it alone or with your family. But yes, the duty does not just end with just installing it. It can soon turn into an eyesore if you ignore it for days. You have to pay adequate attention to any water feature, as you do to the plants and pots so that it continues being a focal point of the garden.
Maintaining Outdoor Water Feature Melbourne is much more difficult than cleaning the indoor ones. They are exposed to wind, snow, acid rain, leaves, twigs, animals, debris, dust and dirt. But don’t worry, you do not have to toil for hours or buy expensive cleaners for it. All you need to do is plan meticulously and ask all your family members to join and help you for at least an hour once every week and for a few minutes every day. Take a look at some of the things you have to do so that your Water features Melbourne continue to shine and look like new.
Regular procedures
Here are a few things which you have to maintain on a regular basis.
Check the water level regularly and add more water if needed. Make sure that the pump always remains submerged. Remember the life of a fountain depends on its pump. If possible, then only use distilled water.
Take the pump right out and clean the debris with a piece of dry cloth. Otherwise, it might clog and would stop circulating the water.
Use a screen mesh in order to remove all the leaves, twigs and insects that remain floating in the water. These screen meshes or nets are widely available at the stores, and wouldn’t hurt your pocket as well. If you don’t have time to do this on a regular basis, try at least on every alternative day.
Weekly procedures
Here are a few things that should be done by you at least once a week.
Once a week, remove the pump from the water feature and soak it for some time in a solution of fifty percent diluted distilled white vinegar. The mineral build up in the pump will come off in this way.
Remove the pump cover once every week, then, use an old toothbrush to clean the “hard-to-reach” areas in order to get rid of every bit of debris.
Use a brush, hot water and dish washing mild detergent in order to clean the insides of Outdoor Water features Melbourne. Scrub every inch of it. If you see some serious spot or stain, then you can use abrasives like baking soda or vinegar. They are safe and wouldn’t harm your water feature.
Make sure there is no detergent residue in the fountain.
If there are Artificial plants Melbourne, then wash them as well.
Replace the water twice every week.
Use “algae removing” solutions to prevent algae build-up.
So, these are the easy things you need to do in order to maintain the water features and fountains. Gear up and start taking care of them.
Author bio: Joan Brake is an avid gardener and here, he writes about maintaining Outdoor Water Feature Melbourne. Read his articles to know about Artificial plants Melbourne and Water features Melbourne.
Related Articles -
Artificial plants Melbourne, Outdoor Water Feature Melbourne, Water features Melbourne,
