The metalwalk for permanent access to a commercial or industrial roof is too important to skimp on. Anyone up on the roof, whether a professional or not, is at danger of falling from great heights. You want to ensure that your metalwalk is installed to the highest industry standards by the best metalwalk contractors in Kansas City, MO. You also want to make certain that the roof metalwalk design in Kansas City, MO is tailored to your exact needs, so you are rest assured that anyone going up there will be safe and sound. Otherwise, the results could be deadly. The Dangers of Being up High Being up on a roof, even a flat one, is dangerous. There are many things that can happen to a contractor or maintenance professional when they are up there performing work or conducting an inspection. Obviously, the number one concern is falling from that height. Should someone fall over the edge of a commercial or industrial rooftop, he or she will be injured seriously or worse. You cannot risk the wellbeing of people by not hiring metalwalk contractors in Kansas, Mo to do everything in their power to make sure that the rooftop is as safe as possible. Walkways One of the components of your roof metalwalk design in Kansas City, MO is permanent walkways for people to traverse safely across the top’s surface. Walkways are often made from grating, and a good size to consider is 12 inches wide by 12 inches long. Make certain the contractor uses planks that interlock for your walkways, as this gives you better flexibility in your design. They should also be skid-proof to avoid slips and falls. If you’re looking for extra protection on the walkways when it’s raining outside, have the metalwalk contractors in Kansas City, MO add 4-inch toe board surface to the walks that is also non-skid. This gives you the added peace of mind that if your maintenance crew has to go out in a rainstorm to assess a problem on the roof, they will be safe from the risk of slipping on the wet walkways and falling. Protect your employees while they’re up there. Guard Rails You will also want guard rails included in your roof metalwalk design in Kansas City, MO. This gives everyone something to hang onto as they’re walking across your roof. Make certain the contractor installs guard railing on both sides of the walkways. A two-hand grip is safer than a one-hand grip, and should somebody begin to fall, they’ll have something to reach out for and grab on both sides. Of course, all materials and installation should exceed IBC 2012 and OSHA code requirements. Finally, hiring experienced and qualified metalwalk contractors in Kansas City, MO should give you savings on your business property and liability insurance. Most companies will honor the fact that you’ve just made your facilities safer for employees and visitors and reduce your monthly rates. Contact a qualified contractor today to reap all of the benefits of metalwalks on your roof. You’ll be happy – and safer – that you did.
Related Articles -
metalwalk, contractors, Kansas, City, MO,
|