|
The Code Reader for Car system is not as complex as you think. It is a matter of time until you become fully knowledgeable about this system. The plug has 16 holes, but noticing this well only in some the "copper" indicating that that hole is used. Depending on which holes are used, one may determine the protocol used OBD2. Read on and find out more! Protocols vary and you need to gather as much data as possible. It must be said, that in addition to the holes that are colored in the images (corresponding to each protocol and pin (holes) used by this protocol, all use four extra holes (which may vary and are not concerned with the protocol) that are used for feeding cable and interpretation device (scanner). There is another one called PIN 15, lighter colored, and it is optional. Keep in mind, this may or may not be present in the ISO protocol. You will probably note four pins (holes used) that do not appear. OBD ii Code Reader diagnostic is a simulator that acts as an automotive scanner so that communicates via the same connector provided on the vehicle with the electronic control unit of the same. Functions are impeccable! Make sure you remove all stored fault in memory original electronic control unit of the vehicle. Good news is, the best system is adaptable to different types of communications protocols CAN BUS. In case you didn’t know, there are a few differences. Begin by learning what the difference between OBDI and OBDII is. To answer this question we will have to go a few years back, to the beginning of fuel injection. According to specialists in the field, some of the most influential in the development of the car have been the Germans. Top experts have pioneered diesel injection pumps, CAN-Bus systems, various Code Reader for Car sensors on vehicles and security systems. However the U.S. market massive approach occurred due to the popularization of the automobile expansion and from the first half of the century. Back in the 70s, California had the serious problem of pollution due to the large number of vehicles in circulation. This is when OBD ii Code Reader systems come to play an important role. In short, from the 80's, manufacturers started placing a series of laws which was intended to increase engine efficiency and thus achieve lower emissions product of the exhaust gases.
Related Articles -
Code Reader for Car, OBD ii Code Reader,
| 
