|
Most of the computer users have encountered numerous problems due improper shut down of their computer systems. One of the major cause for unexpected system shutdown is power outage. While there are many problems that you might encounter after power outage, one of them is deactivation of the Novell Netware volume. In most of these situations, you encounter an error message stating the above problem. The data saved in the Netware volume becomes inaccessible once it is deactivated. In such situations, an easy way to access the Netware volume data is by restoring the data from an updated backup. However, if you have not created or maintained your data backup, then you will need to opt for an effective Novell Recovery application, which can recovery your data. Consider the below error message that explains the above scenario: "Drive is deactivated" The error message pops up when you attempt to boot your system after a power outage. After the above error message pops up, every one in the network is locks out and the data saved in the drive becomes inaccessible. Cause: The above error message is caused primarily due to improper shutdown due to power outage. Resolution: To resolve the above error message and to access the data saved in the drive, run the Vrepair command. In most cases, the Vrepair command resolves the above issue and hard drive data becomes inaccessible. However, if in case the command fails to resolve your problem and you still encounter the above error message, then you will need to recreate the Netware volume. Once the volume is recreated, you can restore the data from an updated backup. But, with inaccessibility of an updated data backup, you will need to use an advanced third-party Novell Recovery software to recover your lost data. A Data Recovery Novell software uses powerful scanning methods to recover lost, deleted, missing, and formatted files. The files remain recoverable irrespective of the cause of logical crash. The software requires no prior technical knowledge and allows even a non-technical user to perform recovery. The recovery application can be downloaded from the Internet. Novell Data Recovery is a recovery tool that not allows you to recover your lost data, but also restores it at your preferred destinations. The non-destructive Data Recovery Novell software is competent enough to recover data from almost all multi-disk drives, including SCSI, IDE, and EIDE. Available in two forms (demo and complete), the tool supports Netware 6.5 and 6.0.
Related Articles -
novell recovery, novell data recovery,
|
