|
It is always important to maintain a high level of safety in your workplace. As an employer, it is your responsibility that your employees are protected from any risks while they are in the premise of your business location. One of the main aspects that you need to take care of would be the electrical safety of your business. That is why, you need to comply with the regulations of the OH&S when it comes to electrical safety of your appliances. This way, you can ensure that your employees are safe from any potential risk of injury or death by electrocution. The best way to oversee this would be to avail of test and tag in Melbourne. What is Test and Tag? - Testing and tagging is procedure that tests electrical appliances which are portable and needs plugging on a convenience outlet. It is important that all portable appliances in a workplaces to be tested in order to prevent any chances of electrocution. The test and tag in Melbourne is done through a series of tests. The first step would be to check the visual aspects of the appliances as well as the plug that is attached to it. The wiring of the appliance is also assessed if it is connected correctly. Each appliance is then plugged into an appliance tester. The test will check the insulation resistance and earthing continuity of the appliance. Once the appliance is found to adhere to the requirements, it will be labeled as such. Appliances which have failed the test and tag will be labeled as faulty and will be removed from the workplace. How Often should you Acquire of Test and Tag Services - You need to schedule the evaluation depending on the kind of work environment that you have. For office equipments, test and tag should be performed within a frequency of three to five years. Workplace portable equipments are considered low risk as per AS3760 standards. In work environments where power tools are frequently used, the evaluation should be conducted every three months, while workshop appliances are usually assessed every six months. The frequency of use and stress determines the frequency of the test and tag in Melbourne. Hiring an Expert - electrical testing and tagging Melbourne is a risky and complicated process. Thus, you need to hire a certified electrician as recommended by AS3760 standards. The electrician should document the results and give a copy to the employer. In addition, the service provider should also submit a list of faulty appliances.
Related Articles -
electrical safety testing, electrical testing and tagging, electrical testing tagging, electrical tag testing, testing and tagging, testing and taggin,
|
