|
The hydraulics are best for using in farming and construction equipment or industrial field and these cylinders are either by single action or 2 way double action. The hydraulic pressure makes it extend with the spring and the gravity makes it retract the springs. This is for the single action cylinder. The double action cylinders are used with the hydraulic pressure and hydraulic power can be given in any of the direction or both the direction. You will find these cylinders can be rebuilt for hydraulic cylinder replacement work and there are a few steps in which these cylinders are replaced. Repacking the seals is part of the job The replacement is the way of repairing the leaking cylinders and once the cylinder leaks you need to replace it or rebuild it. The most common part of the industrial hydraulic cylinders is to repair it and it is done by repacking the seals of the cylinder. The repacking needs few mechanical works and if you feel you cannot do it then the mechanical repair or the hydraulic repair will do it for you. You need to take the cylinder down from the machine and now remove the piston. Customized cylinders are tested for clients First you can take off the cover of the cylinder and you have to unscrew it and you can also find bolts for removing them instead. The customized hydraulic cylinder does not look like the regular cylinders and you can make them look as per your choice. They are oil tested and painted. Robot welding is used to seal these cylinders. To remove the cylinder piston you will have to make the valve loose and then lessen the heavy pressure to remove the piston shaft and then take away the piston from the shaft. Problem with the cylinder to be found Once you have the piston away from the cylinder, you must take a close look and find out the problem with the cylinder. The piston shaft if often found to be bent and sometimes the Cylinder bore is scratched and you will have to take it to a repair shop of hydraulic cylinders. The standard hydraulic cylinder will need a new shaft for setting the piston or you will need honing of the cylinder and the bore and in this way you can remove the scratch marks and put back the seal. You will need special machines to do these works and hence you will need a repair shop. You will have to repack the cylinder seal and for that you will need the seal kit for the cylinder type you are using. The kit will give you the o-rings and the seals that will be needed for the work. The hydraulic cylinder parts are to be taken extreme care of as you are to seal back the cylinder with a new seal. Take off the old seal and put the new one in place and do it exactly as the old one. Then you have to put back the piston and this is done with the help of hydraulic fluid. The piston slides back into position. The piston should be easy to move and then you will know that the setting of the piston is done. About Author: This article is written by HC Hydraulic Cylinder which is a leading hydraulic cylinder troubleshooting and one of the best choice for hydraulic cylinder repair as well as Large Hydraulic Cylinders throughout the world. For more details, you can visit http://www.earticlesonline.com/Article/Hydraulic-Cylinders-Meeting-The-Best-Your-Industrial-Requirements/1652045
Related Articles -
hydraulic, cylinder, replacement,
| 
