Routine Garage Door Upkeep Helps To Avoid Nasty Surprises

Based on the arrangement of your house, you most likely find yourself entering and exiting your home through your garage door. That makes the garage entrance and it's associated opener a very critical and useful part of your home.

One of the unavoidable facts of life is that everything made by man sooner or later breaks. That definitely applies to garage doors. If you plan on a failure to occur before it happens, then you reduce your difficulty and your costs.

When you reflect about it, your garage door opener and springs are awesome innovations. Jointly they can lift a 450 pound door at the tap of a button. Still more amazing is that if there is an object in the pathway of the door's travel, it will stop and turn around on a dime.

Children are God's gifts, but they can be destructive to a garage door with an opener. Do not permit them to repetitively push the opener button. This will eventually cause your garage door opener to break.

Here are several important routine precautionary upkeep guidelines.

Two times a year when the clocks change pull the rope that disconnects the garage door from the opener.

Then carry out a equilibrium test. Once the door is in "manual mode" check to see if it is properly balanced. Open the door half way. It should remain there without you touching it. If this is not the case, you may have a cable or spring malfunction. Phone a garage door company so that they can further analyze your trouble.

Observe your garage door's rails and the chain or belt on your garage door opener. Look to see if the rails are parallel and that they are free from debris. See if there is any evidence of wear and tear on your opener's drive belt. Belt replacement is easily and economically done by garage door companies., inspect your garage door's cables, rails and your openers chain or belt for signs of wear.

Oil all metallic parts twice a year with a suitable metal lubricant. The same applies for weather seals. Make sure to apply a silicone based lubricant. This will add years of care free operation to your garage door.

Test the stop and reverse protection feature of your garage door opener. Waive your hand under the garage door as it is closing. It should stop and reverse. As soon as it has reached the full up position, your garage door light should blink.

You're finished! The complete inspection procedure should not take any more than just a couple moments. Isn't it pleasant to be ahead of the upkeep curve and know that you've done everything you can to anticipate garage door problems? Check this out. garage door repair

Related Articles - raynor, garage, door, opener, remotes,

Email this Article to a Friend! Receive Articles like this one direct to your email box! Subscribe for free today!