|
Scheduled preventive maintenance is a good idea for your auto, your heating and airconditioning and a host of other items around the home. It is in addition a very good idea when it comes to your garage door. Depending on the arrangement of your residence, you most likely find yourself entering and exiting your home through your garage door. That makes the garage entrance and it's associated opener a very vital and practical part of your home. All mechanised and electrical things in due course stop working. It is just a reality of life and there's no way around it. But if you can see your way to plan on something breaking ahead of time, then when it actually breaks, life will be simplier and easier. When you reflect about it, your garage door opener and springs are marvelous inventions. Mutually they can lift a 450 pound door at the tap of a button. Even more amazing is that if there is something in the path of the door's travel, it will stop and turn around on a dime. Children are God's gifts, but they can be harmful to a garage door with an opener. Do not permit them to repetitively push the opener button. This may ultimately cause your garage door opener to break. Here are a number of important scheduled preventative maintenance recommendations. Twice a year, you should disengage the automatic opener while the door is closed. This can be completed by pulling on the red rope or pull rope. Do a balance test. Open the door roughly half way. Next let go of the door. First, it ought to be easy to pull the door up. Secondly it must stay at the half way position when you let go of the door. If it doesn't meet the aforementioned criteria, you may have an impending cable or spring malfunction. Visually check rails, chain/belt and mounting brackets on your garage door opener. Horizontal rails must always be parallel to assure that the door operates properly. For care free operation of your garage door it should be lubricated. With a silicon based lubricant, spray your garage door spring, roller shafts and garage door chain. Test the stop and reverse safety feature of your garage door opener. Waive your hand under the garage door as it is closing. It should stop and reverse. As soon as it has reached the full up position, your garage door light ought to flash. You are finished! This complete test shouldn't require more than just a few minutes. As they say, an ounce of prevention is worth a pound of cure. You are on your way to happy and worry free use of your garage door. Check this out. challenger garage door opener
Related Articles -
garage, door, repair,
| 
