|
|
 |
|
|
Printed Circuit Board (PCB) and Its Composition by 3w mr16
|
|
|
Printed Circuit Board (PCB) and Its Composition |
|
|
|
|
|
Business
|
|
A printed circuit board, or PCB, is used to mechanically support and electrically connect electronic components using conductive pathways, tracks or signal traces etched from copper sheets laminated onto a non-conductive substrate. It is also referred to as printed wiring board (PWB) or etched wiring board. Printed circuit boards are used in virtually all but the simplest commercially produced electronic devices.
A PCB populated with electronic components is called a printed circuit assembly (PCA), printed circuit board assembly or PCB Assembly (PCBA). In informal use the term "PCB" is used both for bare and assembled boards, the context clarifying the meaning. Alternatives to PCBs include wire wrap and point-to-point construction. PCBs must initially be designed and laid out, but become cheaper, faster to make, and potentially more reliable for high-volume production since production and soldering of PCBs can be automated. Much of the electronics industry's PCB design, assembly, and quality control needs are set by standards published by the IPC organization. You can buy custom pcb from professional manufacturers.
The basic components of the circuit board PCB mainly has the following composition Pattern: the line is conduction. The design will also have a large copper surface as ground and power planes. The line drawing is made at the same time. Dielectric: is used to maintain the insulation between the lines and the respective layers, commonly known as the substrate, such as double sided pcb. Through hole / via: vias line above the two levels can be turned to each other, the larger vias, as part plug with another non-conductive hole (nPTH) typically used as a surface paste installed fixed positioning, assembly screws. Solder resistant / Solder Mask: not all of the copper surface should have tin on parts, non-tin area, will be printed on the copper surface layer of isolation material (usually epoxy) which iseating tin, avoid eat non-tin line between short-circuit. Depending on the process, the materials are divided into green oil, oil, blue oil. Legend / Marking / Silk screen: This non-necessary part’s main function is name of the label the parts on the circuit board, the location box, easy assembly, maintenance and identification. Surface Finish: Because the copper surface in the general environment is easy oxidized which can cause not on the tin (solder) and therefore will eat tin copper surface protection. The protection ways are HASL, ENIG, silver (Immersion Silver), tin (Immersion Tin), and OSP. All the methods have advantages and disadvantages and are collectively referred to as surface treatment.
www.pcbxz.com is a specialist in the production of single, double-sided, and multilayer circuit boards. Founded in 2006, the company now has a plant area of 6000 square meters and over 300 employees. Circuit panels produced by the company have a wide array of uses including lithium batteries, communications, digital, power, automotive, medical treatment, computers, audio and other fields.
This article is come from: http://www.chinaphoneparts.com/index.php/printed-circuit-board-pcb-and-its-composition.htm
Related Articles -
custom pcb, double sided pcb,
|
Rate This Article  |
|
|
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
| Reader Opinions |
|
|
|
|
|
|
|
|
|
| Author Login |
|
|
 |
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
DONNIE LEWIS
I'm an avid consumer of a smoothie a day living, herbs, vitamins and daily dose of exercise. I'm 60...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
PAUL PHILIPS
For more articles, blog messages & videos and a free e-book download go to www.NewParadigm.ws your p...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
