Missing Keys.plist data for this build Redsnow ios 6.0.1 FIX Tutorial

Why I’m i getting “Missing Keys.plist data with this build”?

Currently Redsnow does not support ios 6.0.1 in the direct approach, it only supports iOS 6.0. Speculate the majority of iOS devices now are running ios 6.0.1, an imaginative method was shown enable iPhone 4/3GS & apple ipod touch 4G users to jailbreak their device that is running ios 6.0.1 using Redsnow.

This technique is performed by tricking Redsnow into thinking that your iOS set up is running iOS 6.0 while its actually running ios 6.0.1 and thats why within the jailbreak tutorial we ask you to download iOS 6.0 (NOT 6.0.1) although your system is currently running ios 6.0.1. (i know its a little confusing, just get the overall idea don’t read an excessive amount of involved with it).

So since now we all know the current Redsnow won't support ios 6.0.1, if you utilize ios 6.0.1 with Redsnow to jailbreak your device that is running 6.0.1, Redsnow will give you these error: Missing Keys.plist data because of this build and infrequently larger than fifteen can keep coming up even though you realize your mistake and commence using iOS 6.0 instead. Nevertheless for every problem there exists a solution. The best way to Fix Missing Keys.plist data just for this build error?

• STEP1: Download iOS 6.0 to your device through the links below:

o iPhone 4 (GSM) iOS 6.0 o iPhone 4 (CDMA) iOS 6.0 o iPhone 3GS iOS 6.0 o iPod Touch 4G iOS 6.0

• STEP2: Exit out of Redsn0w completely if you have it open. • STEP3: Connect your iOS device to the pc. • STEP4: Place your iOS device in DFU Mode << click here to learn how. (Do NOT open Redsn0w yet) • STEP5: Now go to Redsnow and follow the steps below according to your computer operating system:

o For Windows Computers: o Navigate to your Redsn0w.exe file and right click on it and the select Properties. o On top Click on Compatibility. o Go to Compatibility mode and Check Run this program in compatibility mode for. o Select Windows XP (Service Pack 3). o Then go
down to Privilege Level, and
make sure that Run this program as administrator is checked. o Click OK. o Now Launch your jailbreak software and everything should work just fine. o For Mac (use Ctrl-Click->Open if on Mountain Lion)

• STEP6: Once Redsnow is launched goto Extras>Select IPSW then select iOS 6.0 for your device (usually the one you downloaded in STEP1). Here is how the name of the iOS firmware need to look like:

o For iphone4 (GSM) >> iPhone3,1_6.0_10A403_Restore.ipsw o For apple iphone 4g (CDMA) >> iPhone3,3_6.0_10A403_Restore.ipsw o For apple iphone >> iPhone2,1_6.0_10A403_Restore.ipsw o For apple ipod touch 4G >> iPod4,1_6.0_10A403_Restore.ipsw

• STEP7: And then return back, Jailbreak and install Cydia and after that when the jailbreak is done along with your iOS device is booted on, switch off your iOS device. • STEP8: Exit out of Redsn0w completely in the event you still have it open. • STEP9: Disconnect your device through the computer and fasten it in, then Place it in DFU mode, and Lanuch Rednsow again (in an identical way as STEP6). • STEP10: Once Redsn0w is launched goto Extras>Select IPSW find the iOS 6.0 file again. Then Click Extras>Just Boot.

Please remembers that because this is a tethered jailbreak, so when you reboot your iOS device, you will have to redo STEP8 - STEP10 again.

The aforementioned tutorial was created after many, many tests and will also fix Missing Keys.plist data for this build error in 99% with the cases, if you decide to followed the tutorial above and you really are still obtaining the error, more than likely you are carrying out a problem and you also must browse the instructions above again and use it verbatim. If you're certain that you've you very well may want to try one of many following goods that may cause Missing Keys.plist data for this build error to maintain coming:

• Try another computer. • Try to utilize a different USB slot with your computer when connecting your device. • Try different Cable when connecting your device to the pc. • Disable Firewall on your hard drive. • Uninstall any Antivirus on your computer that may be blocking Redsnow from talking with the server. • Delete Redsn0w, delete the IPSW (iOS 6.0), go possess some coffee, then keep coming back and initiate fresh over completely from scratch.

I'd personally love to hear your feedback, whether if it tutorial helped you or you remain facing Missing Keys.plist data for this build error, please make use of the comments section below to share your experience.

Please follow this link for more info on missing keys.plist data for this build

Related Articles - cydia, fix redsnow error, missing keys.plist, missing keys.plist data, missing keys.plist data for this build,

Email this Article to a Friend! Receive Articles like this one direct to your email box! Subscribe for free today!