|
Netgear wireless router is one of the most popular wireless networking devices and it allows you to be linked your computers, laptops, peripheral devices, and non-computer devices etc. It has a highly awkward process for setting up a Netgear wireless router. Here are easy steps to help you:- First of all type the router's IP address on an Internet's address bar. You may also access the GUI by typing routerlogin.net or routerlogin page on a web browser. 1. If there is no connection with the Router, you should verify IP address and default gateway information 2. Now you need to clear browser cache or restore default settings for the browser. 3. Now reset the router. Here are tips for verifying network connection between the computer and NETGEAR Router: • Connect the desktop to the LAN port on the router. You should not connect the modem to the router yet (to prevent in case of double NAT). • There should be no USB cables connecting the modem openly to the system. • Now click on Start button and go to Run. Type CMD there and press Enter. • On the command prompt, type IPCONFIG and press enter. It will show you computer's IP address information • Check the IP address information for the adapter which is connected to the NETGEAR router. • If the IP address for the resultant adapter is 0.0.0.0 .x.x, this point to that your computer is not capable to correspond with the router. You need to check your network configuration and wireless settings in case of wireless adapter. If you are not capable to get an IP address in spite of accurate network configuration, try to reset the router and retry. • If adapter connected to the NETGEAR router shows “Media disconnected", you should check the physical connection like ethernet cable in case of a wired connection, wireless settings in case of a wireless adapter. • Remember that NETGEAR router's IP address is the default gateway address of the network adapter connected to the router. • You can get the router interface using the default gateway address or type routerlogin page on your browser. • You will be provoked for username and password to access the interface. By default the username is admin, and the default password is password except you have changed it. • If you are yet incapable to access the administration interface, just disable any firewall software and try once more. You should also use a dissimilar computer to access the router interface. IveeraSupport is world leading Independent Netgear Router Support provider offering the best of remote tech-support service. Visit us to get any kind of technical help for Netgear Support.
Related Articles -
Netgear Router, Netgear Router Support, Netgear Support,
| 
