|
|
 |
|
|
How to Carve Sandstone Figures by Vicky Smith
|
|
|
How to Carve Sandstone Figures |
|
|
|
|
|
Business
|
|
|
Since I was born, I have come into contact with stones, for my hometown is abounded in producing and manufacturing a great selection of stones, including andesite, granite block, granite and so on. Therefore, when I grow up, I have become interested in carving sandstone figures. Now I would like to tell you about more sandstone figures. People have sculpted with sandstone for centuries. It’s a medium that needs practice when carving, however, as it’s both soft and brittle. Because of this, it’s easy to strike too hard and ruin the piece you’ve been working on, especially when you reach the fine detail. The work is done in stages, first carving the rough shape, then gradually making it more detailed, using tools with thinner points. Firstly, place a tarpaulin on the work surface to protect it and stand the block of sandstone on that. Mark out the shape of the figure you’re carving on the sandstone, using wax crayon. Mark out the rough shape on all four sides of the block to offer a good guide for the initial cutting. Secondly, put on the dust mask, heavy gloves and safety goggles before starting to work, so you won’t breathe in the sandstone, end up with any in your eye or accidentally cut yourself with the chisels. Thirdly, hold the fine-tip chisel so it’s at a 45 degree angle to the sandstone. Hold the tip against the sandstone at one of the top corners and hit the end of the handle with the mallet to begin removing the sandstone. Continue until you have the general outline of the figure. Fourthly, pick up the tooth chisel and use this to remove all the craving lines and bumps from using the fine-tip chisel. Work slowly over the surface until you’ve smoothed out the sandstone in the shape of the figure. Fifthly, select a flat chisel to begin adding detail to the sandstone carving; a fine-tip chisel is best in a small area while the wide tip works best when you’re working over wider surfaces. Sixthly, exchange the flat chisels for a riffler, which is a small chisel with a thin point, and is intended to give detail in small areas. Complete the details with this, working slowly to ensure you don’t take off more of the sandstone than you’ve intended. Continue until you’re satisfied with the carving of the figure. Seventhly, sand the figure with silicon carbide sandpaper. Start by working over lightly with a coarse paper – about 120-grit – then progress through finer grits until you finish with a 1000-grit sandpaper that will give a polish to the carved figure. In a word, as an outstanding business E-platform of promoting stoneindustry, so far, So far, our client resource has accounted over 100 thousand spreading more than 100 countries and regions, with a visit volume exceeding 5 million times annually. If you want to consult us freely, you can also see Quarrying & Processing Equipment or become an honest follower of us by @stonebtb of https://twitter.com.
Related Articles -
sandstone, stone,
|
Rate This Article  |
|
|
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
| Reader Opinions |
|
|
|
|
|
|
|
|
|
| Author Login |
|
|
 |
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
DONNIE LEWIS
I'm an avid consumer of a smoothie a day living, herbs, vitamins and daily dose of exercise. I'm 60...more
|
|
|
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
STEVE BURGESS
Steve Burgess is a freelance technology writer, a practicing computer forensics specialist as the pr...more
|
|
|
|
