|
A chimney serves as ventilation for the burnt by-products on the fireplace. This prevents suffocation as well as the unnecessary circulation of smoke and bad air inside the house. Most importantly, it helps deflect water from getting inside the house through the open space of the chimney. However, this would be possible only with the aid of a chimney cap as it protects the opening from rain, debris, as well as the entry of animals. Sealing a chimney cap will greatly increase the potential of the device in blocking off and preventing the entering especially the sipping of water inside the concrete material as well as inside the structure. Any person can accomplish this simple task with the help of a good quality sealer, some tools, and a fair weather condition. When up to the task, make sure that you are properly secured and safe up the roof to avoid accidents from happening. Tools and Materials - get a sturdy ladder, a container for the sealer, brush, and the sealing product. Make sure that these are all prepared before you climb up the roof to avoid unnecessary ups and downs on the roof as this can be quite risky and dangerous especially for people who are inexperienced with this kind of stuff. Preparation - set up the ladder somewhere safe near the chimney area in order to avoid longer walks. This can also reduce the threat of accidents that can possibly occur as you walk on the roof. Prepare all the stuffs you need near the chimney so that you can accomplish the task a lot faster and easier. Clean Chimney - before you seal the chimney cap, make sure that it is properly cleaned and cleared of stain in order for the sealing product to attach and coat the device. Cleaning the chimney would also lengthen the longevity of the material as it will keep it on its top condition. Before you use any chemical product for your cleaning task, make sure that they would not damage the bricks in return. Some products contain chemicals that are strong enough to cause discoloration, cracks, and crevices on the various areas that have been used with the stuff. Seal Cap - after you are through cleaning all areas of the chimney, it is now time for you to seal the cap. Get the brush and pour some of the sealing solution on the container. Dip the brush and sweep carefully on the cap of the chimney. Use hand gloves during this process to ensure safety as it contains chemical solutions that are harmful to the health. Repeat the process until you are satisfied with the effects. Coat the chimney cap all over including the edges and joints to make sure that moisture does not get inside as this is the main cause of deterioration. Inspect Work - similar to all sorts of jobs, checking your work afterwards is very important to ensure proper accomplishment as well as to see if the project was successful. I also write about getting the right hot stone massage kit by picking the right basalt stones with the correct density.
Related Articles -
seal cap, chimney cap,
| 
