|
When it comes to changing projector bulbs, not only are they quite sensitive but are very expensive as well. Not following the proper care procedures reduces the average lifespan of projector bulbs so they do not last as long as they should. Unlike our usual expectations, the lifespan of projector bulbs becomes shorter even though they are meant to last at least 24,000 hours. Thus all of these factors increase the concerns in the minds of people who want nothing better than to know how to increase the lifespan of their projector bulbs and appropriate protect them. Touching the projector lamp bulbs with bare hands should be avoided. Unlike the usual light bulbs, the process of replacing or arranging the position of projector bulbs is quite different. Unlike the average light bulb, projectors bulbs burn much hotter and more easily therefore not only is it unsafe to directly touch them but they are really sensitive as well. Oily print marks can also be left on the projector bulb if it is touched with bare hands. The way in which images are projected on a screen by a projector can be detrimentally affected when the bulb’s surface gets embedded with the oil from fingers. Furthermore these prints do not come off easily no matter how hard an individual might try to wife them away. Since the light that needs to be sent out by projector bulbs gets diffused by oily print marks over their surface, therefore their lifespan is further substantially decreased. Before the power switch of a projector is turned off, the projector bulb should be turned off first. A lot of people have the misconception that they should be turning off the power switch before turning off the bulb, but the right way is to do the opposite. Since there is so much heat bursting off the surface of the projector bulb, so the cooling fans of the projector continue to cool the bulb down if the bulb is turned off first. Thus instead of being immediately and suddenly being switched off, the DLP TV bulbs get enough time to gradually cool down. Unnecessary contractions that can detrimentally affect the projector bulbs if they are not allowed to properly cool down are also prevented due to this gradual cooling down effect. Bumping the projector should also be avoided. To prevent people from unnecessarily touching or bumping a projector it should be stored in a proper, safe space. Sudden movements that impact a projector can cause damage to the projector bulb. The filament of projector bulbs can easily crack or snap even with the slightest touch due to being extremely sensitive. Thus it becomes obvious how sensitive projector bulbs actually are and it definitely cannot be doubted that they are very expensive as well. Thus it becomes quite essential to know how to protect these bulbs from the different conditions that could harm and damage them. Following the tips mentioned here can certainly ensure that the average lifespan of a projector bulb will be preserved. Author: Fix your TV now. Do you need a Samsung bp96-00674a color wheel replacement or a Infocus In72 lamp replacement?
Related Articles -
How, to, protect, your, projector, bulbs,
| 
