|
HVAC stands for heat, ventilation, and air conditioning. It is a technology dealing with temperature and humidity control for both indoor and automotive environment. It is important in the design of medium to large structures wherein the control of temperature and humidity, as well as the infusion of fresh air is important. HVAC designs for large industrial buildings and skyscrapers are oftentimes large and complex. Maintenance of this system is a full time task. And the necessity of reliable HVAC parts is paramount. The Importance of Heating Especially in cold climates, heating is essential for comfortable living and working conditions. To this end, boilers, furnaces, and heat pumps are utilized. In smaller areas, electricity can be used to provide heat, through resistance heating. Ventilating for Healthy Indoor Air It is not enough that a comfortable indoor temperature is maintained. The quality of air should also be kept at acceptable levels. That means smoke, dust, and airborne bacteria (to name a few) should be expunged and replaced by clean air. The simplest way of doing this is using an exhaust fan. This is done in both household and industrial settings. However, the location of the fan should be in accordance with a sound HVAC design for it to be effective. Using an exhaust fan is an example of forced ventilation. Another alternative is natural ventilation. This is done by using trickle vents and windows if the architectural design permits. Air Conditioning – The Removal of Heat Air conditioning and refrigeration are based on the same principle of heat removal. More often than not, this involves radiation and convection. And practically all air conditioning and refrigeration systems rely on a compressor. The simplest air conditioning system is a single stand-alone unit in a room or inside a vehicle. Of course there are more complex centralized designs requiring bigger and higher capacity compressors. It should be noted that air conditioning also provides humidity control and ventilation. For the well-being of the occupants, all HVAC components installed in an edifice should be working properly. And this necessitates periodic maintenance and the use of quality HVAC parts. Refrigeration for Business and Industry Walk-in coolers and freezers make use of special discus compressors. These are heavy-duty and high capacity units with horsepower rating ranging from five to sixty. It allows for capacity adjustment from 10% to 100% for proper matching with the load of the refrigeration equipment. The optimum adjustment will increase the system’s efficiency and improve the compressor’s reliability. This type of compressor provides the added advantage of on-board diagnostics. This makes troubleshooting and maintenance a lot easier, and it minimizes repair cost and downtime. Needless to say, discus compressors are the workhorse in supermarket, food service, and industrial applications. And many of these establishments rely on Copeland discus compressor, which are known for their quality, reliability, and energy efficiency. As with HVAC components, maintenance of refrigeration equipment is critical. This is especially so in the storage of perishable goods. For this reason, only quality parts should be used. Hvacplus.com will provide you with assistance in sourcing HVAC part. It even has a section specific to Copeland discus compressor parts. For those involved in the maintenance of HVAC systems, this site is invaluable.
Related Articles -
HVAC Part, Copeland 6D semi-hermetic compressors, Carrier Air Conditioning Compressor, Copeland Discus compressor,
| 
