|
The following conditions need to activate the battery handling: 1. Just opened a new battery. 2. For a long time do not use the battery, the battery from the computer store the state office, is re-opening of this battery. 3. A long time do not use the battery from the notebook or laptop stand out of storage (more than two or three months), now re-enable this battery. Activation of the battery processing method: Activation of chemicals within the battery to maximize battery performance, need to repeat the charge and discharge the battery (fully charged and then fully discharge) three times. The so-called fully charge and discharge means: the normal boot order of 3% battery power to the battery (preferably a run out, can be divided into several times to power, but not interval too long), and then must immediately shut down the battery charge 12 hours. Here stressed the need to charge the battery immediately, because even if do not use the battery will self-discharge to 3% when the battery power consumption at this time if the battery charge time, battery self-discharge phenomenon can easily cause over-discharge The damage to the battery, over discharge lithium batteries is a major taboo. Activation of the battery charging processing, office machine must be turned off. If the office waiting time machine, hang and so state, when the charge to 3 to 4 hours of green power status light is no longer beating, the machine will automatically stop charging the battery, so can not be fully charged battery. When the discharge to 3% of the electricity, the machine will automatically enter sleep mode immediately, and you should restart the machine, the machine starts the process off the bottom left of the screen click the button, so the machine off. Laptop battery ACER Laptop Battery ASUS Laptop Battery COMPAQ Laptop Battery Dell Laptop Battery HP Laptop Battery IBM Laptop Battery SONY Laptop Battery TOSHIBA Laptop Battery
Related Articles -
battery,
| 
