125 cc motorbikes with a company-claimed fuel economy of 256 mpg-US (0.919 L/100 km; 307 mpg-imp) and 261 mpg-US (0.901 L/100 km; 313 mpg-imp), respectively.
Very high fuel economy equivalents can be derived by electric motorcycles . Electric motorcycles are nearly silent, zero-emission electric motor-driven vehicles. Operating range and top speed suffer because of limitations of battery technology. Fuel cells and petroleum-electric hybrids are also under development to extend the range and improve performance of the electric motors.
Different types of motorcycles have different dynamics and these play a role in how a motorcycle performs in given conditions. For example, a longer wheelbase provides more stability in a straight line. Motorcycle tyres have a large influence over handling.
Motorcycles must be leaned in order to make turns. This lean is induced by the method known as countersteering, in which the rider steers the handlebars in the direction opposite of the desired turn. Because it is counter-intuitive this practice is often very confusing to novices—and even to many experienced motorcyclists.
Short wheelbase motorcycles, such as sport bikes, can generate enough torque at the rear wheel, and enough stopping force at the front wheel, to lift the opposite wheel off the road. These actions, if performed on purpose, are known as wheelies and stoppies respectively. If carried past the point of recovery the resulting upset is known as an "endo" (short for "end-over-end"), or "looping" the vehicle.
Various features and accessories may be attached to a motorcycle either as OEM (factory-fitted) or after-market. Such accessories are selected by the owner to enhance the motorcycle's appearance, safety, performance, or comfort, and may include anything from mobile electronics to sidecars and trailers. from:wikimotor "> Motorcycle construction is the engineering, manufacturing, and assembly of components and systems for a motorcycle which results in performance, cost and aesthetics desired by the designer. With some exceptions, construction of modern mass-produced motorcycles has standardised on a steel or aluminium frame, telescopic forks holding the front wheel, and disc brakes. Some other body parts, designed for either aesthetic or performance reasons may be added. A petrol powered engine typically consisting of between one and four cylinders (and less commonly, up to eight cylinders) coupled to a manual five- or six-speed sequential transmission drives the swingarm-mounted rear wheel by a chain, driveshaft or belt.
Motorcycle fuel economy varies greatly with engine displacement and riding style ranging from a low of 29 mpg-US (8.1 L/100 km; 35 mpg-imp) reported by a Honda VTR1000F rider, to 107 mpg-US (2.20 L/100 km; 129 mpg-imp) reported for the Verucci Nitro 50 cc Scooter. A specially designed Matzu Matsuzawa Honda XL125 achieved 470 mpg-US (0.50 L/100 km; 560 mpg-imp) "on real highways - in real conditions." Due to lower engine displacements (100 cc–200 cc), motorcycles in developing countries offer good fuel economy. In the Indian market, the second most selling company, Bajaj, offers two models with superior fuel economy: XCD 125 and Platina. Both are 125 cc motorbikes with a company-claimed fuel economy of 256 mpg-US (0.919 L/100 km; 307 mpg-imp) and 261 mpg-US (0.901 L/100 km; 313 mpg-imp), respectively.
Very high fuel economy equivalents can be derived by electric motorcycles . Electric motorcycles are nearly silent, zero-emission electric motor-driven vehicles. Operating range and top speed suffer because of limitations of battery technology. Fuel cells and petroleum-electric hybrids are also under development to extend the range and improve performance of the electric motors.
Different types of motorcycles have different dynamics and these play a role in how a motorcycle performs in given conditions. For example, a longer wheelbase provides more stability in a straight line. Motorcycle tyres have a large influence over handling.
Motorcycles must be leaned in order to make turns. This lean is induced by the method known as countersteering, in which the rider steers the handlebars in the direction opposite of the desired turn. Because it is counter-intuitive this practice is often very confusing to novices—and even to many experienced motorcyclists.
Short wheelbase motorcycles, such as sport bikes, can generate enough torque at the rear wheel, and enough stopping force at the front wheel, to lift the opposite wheel off the road. These actions, if performed on purpose, are known as wheelies and stoppies respectively. If carried past the point of recovery the resulting upset is known as an "endo" (short for "end-over-end"), or "looping" the vehicle.
Various features and accessories may be attached to a motorcycle either as OEM (factory-fitted) or after-market. Such accessories are selected by the owner to enhance the motorcycle's appearance, safety, performance, or comfort, and may include anything from mobile electronics to sidecars and trailers. from:wikimotor
Related Articles -
motorcycles,
|
