|
Have your forgotten about your garage door or your garage door opener? Don't take it for granted, you will eventually be sorry. Doing garage door and opener maintenance now can save problems later. Most people use their garage to enter and exit their homes. In addition almost everyone has a garage door opener that they use to open and close their garage doors. That makes your garage door and its opener a very important part of your home. All mechanical and electrical things eventually stop working. It's just a fact of life and there's no way around it. But if you can see your way to plan on something breaking ahead of time, then when it actually breaks, life will be easier. When you think about it, your garage door opener and springs are amazing inventions. Together they can raise a 450 pound door at the touch of a button. Even more amazing is that if there's something in the path of the door's travel, it will stop and reverse on a dime. Children have a way of becoming enthralled by the operation of garage doors. Left to their own devices they can stress a garage door to the breaking point by pushing the remote or wall button during the movement of the door. Therefore it's important to keep remote controls away from children and do not allow them to have fun with the wall control panel. Here are some ideas that will help you maintain your garage door in excellent shape. Twice a year, you should disengage the automatic opener while the door is closed. This can be done through pulling on the red rope or pull rope. Then perform a equilibrium test. Once the door is in "manual mode" check to see if it is properly balanced. Open the door half way. It ought to stay there without you touching it. If this is not the situation, you could have a cable or spring malfunction. Get in contact with a garage door company so that they can further diagnose your problem. Visually check rails, chain/belt and mounting brackets on your garage door opener. Horizontal rails must always be parallel to assure that the door operates well. Lubricate all metallic parts twice a year with a proper metal lubricant. The same applies for weather seals. Make sure to apply a silicone based lubricant. This will add years of worry-free operation to your garage door. Test the stop and reverse safety feature of your garage door opener. Waive your hand under the garage door as it is closing. It should stop and reverse. Once it has reached the full up position, your garage door light should flash. You're finished! The whole inspection process shouldn't take any more than just a few minutes. Isn't it nice to be ahead of the maintenance curve and know that you've done everything you can to anticipate garage door problems? Check this out. Visit Website
Related Articles -
garage, door, opener,
| 
