|
First to tell you, the battery need not come from the computer won. Bought a new battery after the correct way to use: 1, three times before use. Bought back, the first three power good is to use a fully charged battery and then put the battery run out (preferably the computer automatically shut down.) Then draw a line power supply charge. This charge and discharge times. 2, in subsequent use. In later use, but also as long as the batteries, put the battery run out (the battery alarm on it) and then charge, and 10% normal battery, the battery will automatically alarm, (5% Anyway, when the charge is also OK to control their own good, do not put the computer automatically shut down) when to recharge. The same is the case if the charge is then filled with batteries. Toru not charge half to discharge, electric charge did not put again and again. This is after the battery standby time of life is very much affected 3, the battery on the computer, do not have to win to. Because there is a circuit board inside the battery, charging and discharging are controlled, as long as the battery is full to the rated voltage, the battery is no longer sufficient. If the temperature is too high, but also prolonged use of computers, it is recommended to buy a cooling of the base bar. This will be a good point. Exactly how the books of the Lithium battery maintenance will be right? This problem has plagued the majority of the friends (including me), today found a stuff, changed some content for everyone to see. Lithium-ion battery cathode material of lithium in the active compounds are usually composed of the negative is a special molecular structure of carbon. Common principal components of the cathode material LiCoO2, charging, added to the battery positive pole of the electric potential of the compound to force the release of lithium ions, embedded negative elements were arranged in the lamellar structure of the carbon. Discharge, lithium-ion from the lamellar structure of the carbon precipitation and re-cathode combination of compounds. Lithium-ion movement have a current. Although the chemical reaction principle is very simple, but in the actual industrial production, the practical problems need to be considered much more: cathode material additives required to maintain the activity of multiple charge-discharge, anode material needed to design the molecular structure Level accommodate more lithium-ion; fill in the electrolyte between the positive and negative, in addition to maintaining stability, but also need to have good conductivity, reducing the battery internal resistance. Laptop BatteryACER Laptop Battery Dell Laptop Battery HP Laptop Battery TOSHIBA Laptop Battery
Related Articles -
laptop, battery,
|
