This emphasized the need to charge the battery once, because the battery will be carried out even without using the self-discharge, and 3% when the battery power consumption at this time if the battery charge time, very vulnerable to the phenomenon of self-discharge the battery over-discharge at the expense of battery, over discharge lithium batteries is a major taboo. Processing charge the battery when activated, the machine must be at the off. If the machine at this time to wait, pending other state, when the charge to a 3 to 4 hours after the green power indicator is no longer beating, the machine will automatically stop charging the battery, so can not fully charge the battery. To 3% when the discharge power, the machine will automatically go to sleep right away, and you should restart the machine, the machine starts the process off the bottom left of the screen, click the button to make the machine shutdown. If all of these operations a good grasp of detail and the quality of your battery and no problems, can be a good active chemicals in the battery to maximize battery performance, basically the normal battery after each use can charge to 100%. Problems in the use of: Battery is a kind of "consumables", the loss of the battery depends on when you use the battery for the correctness of the operation, the operation mode, operating frequency, ambient temperature, storage time (not used on the battery), and other factors . 1. The battery charge and discharge the battery life is directly related to the general lithium battery charge and discharge times of about only 400 ~ 600 times, improved product, but 800 times, one charge the battery to the end to the use of a step forward. (85% less power when on battery to charge, will be recorded and to increase the number of times a single charge.) Laptop BatteryACER Laptop Battery Dell Laptop Battery HP Laptop Battery TOSHIBA Laptop Battery
Related Articles -
laptop, battery,
|