|
When deciding it is time to opt for some cable Internet deals and get connected, there are multiple aspects you need to consider and pay attention to. The cable Internet plans out there provide various features and have different characteristics, in order to fit with everyone's needs. For instance, someone who only uses the web to chat with friends and check the e-mail will never need a very solid cable Internet connection. Anyway, once you get connected, you have other problems to deal with. For instance, you may have both a laptop and a desktop and switching the cable from one device to another may cause long term problems to the bell mouth. On another hand, if you decided to get the cable Internet without drilling your door case or the walls, you may also cause problems by pressing it when you constantly close the door. Even when you go to work and grab your laptop with you, if you leave the cable on the floor, you may always fail to see it and step on the bell mouth when you get back. All these problems with cable high-speed Internet have one solution. You will need to learn how to get a bell mouth for your cable Internet. The cables most people use are called UTP cables. They are used between your computer and router or switch. They come in three different ways and each of them has 8 colored wires inside. Since only two of them are common, here is how you can crimp a UTP cable Internet. The straight UTB cable high-speed Internet has the wires placed in the same situation at both sides. The crossover UTB cable Internet is different. At one side, the wires are placed in a particular position, while at the other side, the first wire is replaced with the third one, while the second one is replaced with the sixth one. The straight type is the most common one. Remove the protective plastic shield, but make sure you don't affect the wires. Now, you will see the 8 differently colored wires. Untwist them and place them in a position you can easily set an order from. According to the type of bell mouth you need, the wires must be set in a particular order. The best way to figure out is by checking the old bell mouth and the order of the colors. The wires in a cable Internet are orange, white-orange, white-green, blue, white-blue, green, white-maroon and maroon. Place them in the correct order, then use a special clipper to cut them at the same level. Get an empty bell mouth and introduce the cable Internet with the 8 wires inside. You shouldn't encounter problems, since an empty bell mouth has 8 different slots and the wires usually get in easily. The last act implies putting pressure on the bell mouth and there you go, everything is fixed and ready to use. You will need an empty bell mouth and a special clipper. Shops dealing with such items should have in stock. The empty bell mouths are very cheap, you can't usually just get one, but a whole package of them. As for the clipper, it is more expensive, but definitely a must have for any cable Internet user.
Related Articles -
Verizon, Fios, pricing,
|
