|
If you want something new in your bar or you are planning an event and you wish it was different than the ones you have organized so far, you should take a look at the latest draft beer system that is available on the market. Draft beer is very popular among a large number of customers. However, the systems that are regularly used to pump beer from a micromatic kegerator have a couple of drawbacks: it takes quite long to fill a pint and they produce quite a lot of foam. Besides that, a significant amount of liquid gets spilled and wasted and bartenders can easily lose their patience and become annoyed and bored of slowly pouring beer into glasses when serving bottles is much easier. Customers might get tired of waiting for their turn at the draft beer line, as well, and decide to find another place, where it might be less crowded. But the latest draft beer system is a great solution to these problems. Instead of pumping the beer through a faucet from the micromatic kegerator, this ingenious draft beer system fills the cups from the bottom to the top. That does sound quite interesting, doesn’t it? But how could you fill a cup from the bottom without drilling it? And if it is drilled, wouldn’t a hole at the bottom of a container be quite a problem? These questions are only natural, but the answer might, in fact, already crossed your mind: you use specially designed plastic cups that do, indeed, have a hole at the bottom, a hole which is covered with magnetic rubbers. When you place the cup on the nozzle, the cover is neatly pushed up and automatically placed back where it belongs when the beer level reaches the top. This draft beer system does seem to be quite ingenious so far, but these specially designed cups also seem to be quite expensive, you might say. As you could figure out on your own, the containers you are going to use are pricier than regular ones. Nevertheless, the whole system will prove much more cost effective. First of all, compared to traditional faucets, it causes less waste, which means you will be actually selling more beer from the micromatic kegerator instead of spilling it. Secondly, it is so ingenious and fun to watch and works so much faster than old systems that you will see the number of customers growing incredibly. Moreover, if you get, for instance, a system with four nozzles, one bartender will be able to fill four cups at the same time, so your staffing needs will be reduced as well. Beside all these, you won’t be purchasing just cups, but you will in fact be investing in a very efficient advertising campaign. Why are these specially designed containers different from others, aside the fact that you need them in order to use this new draft beer system? Because you can have the rubber magnets that go on the bottom of the cup custom made. That means you can let your customers keep a souvenir imprinted with your bar’s logo, for instance, a souvenir that they will find in their cup after they finish drinking the delicious beer from the micromatic kegerator. Also, if you are organizing a party or some other event, you can imprint the magnetic rubbers with jokes or inspirational quotes or whatever else crosses your mind. It is a most ingenious way to serve beverages and spread a message at the same time. There is no reason why you shouldn’t try it and see the advantages for yourself. Do you need an experienced company to deal with micromatic kegerator area? Get to work with the best whenever you need draft beer system area.
Related Articles -
micromatic kegerator, draft beer system,
|
