|
Recently, the State Forestry Administration of Quality Supervision jointly on the domestic production of plywood , Laminate flooring , particle board, block board , bamboo flooring and other five categories of forest products quality supervision and spot checks. In Laminate flooring products , particle board , blockboard product checks, Liaoning total of 34 batches of products are random , which qualified 23 batches, 11 batches. composite fence panel Laminate flooring problem was traced to five batches of substandard Laminate flooring is often said that we usually laminate flooring in the sampling in a total of five batches were found ineligible. Insiders, such floors should wear resistance, impact resistance , resistance to deformation , anti- pollution , fire and other features, but contains a lot of adhesives, formaldehyde content easily exceeded. In this sample, the right Laminate flooring products moisture content, surface bonding strength , surface abrasion , corrosion -resistant surface contamination , internal bond strength , thickness swelling , formaldehyde emission and other seven items were tested . Liaoning total of 5 batches of substandard products were detected . ECO-friendly dustbin Particleboard is not high temperature five batches of water on the deformation In spot checks on particleboard products , 26 batches of substandard products has been discovered , Liaoning, accounting for 5 batches. Failed mostly because of the thickness swelling and internal bond strength . Experts said the low internal bond strength makes products occur stratification ; while the higher the intensity , indicating that the ability of the floor to withstand temperature changes better, dense wood floors, to ensure long term at high temperatures without cracking, deformation . The sample of 171 batches Blockboard products, 18 batches of product does not meet the standard requirements , involving formaldehyde emission, transverse bending strength , surface bonding strength , moisture content items. Plywood bamboo flooring products are qualified Liaoning subjects Through the moisture content , bonding strength , formaldehyde emission and other three projects inspection found that 13 provinces, autonomous regions and municipalities, 210 production of 210 batches of plywood products , 26 batches of product does not meet the standard requirements . The major inspection Liaoning forest products , not only to check out some of the substandard products , another part of the floor also affirmed the company's products for the industry to remove the dross , to provide consumers a clear direction of consumption . Outside flooring http://www.woodplasticcompositepanel.com http://www.woodplasticcompositesupplier.com
Related Articles -
Laminate, flooring, problem, was, traced,
|
