|
Most people have no idea how important tube bending is. They see a railing or a chair or even a hydraulic assembly but never stop to wonder how all those pipes are shaped. There aren’t many people who realise tube bending is an art and without it, many of the products we use would not be available. Accurate tube bending is essential as a slight deviation or deformity can mean an entire assembly needs to be scrapped. Likewise, if the product isn’t finished properly or all of the variables aren’t taken into consideration, the client could refuse to take delivery, especially if the assembly falls apart. So, tube bending is a critical process for a number of fields, from the medical industry and shelving units to hydraulics and many consumer goods. Choosing the Right Tube Bending Service Clearly, such a critical process should be carried out by the best, especially since one mistake means the length of pipe needs to be thrown out. An improper bend cannot be fixed. One needs to start again. So, what should you look for in choosing the right tube bending service? First of all, you need to research the metal fabricating shop in question thoroughly. Check how long the company has been in business but also how experienced their employees are. Just because a shop may have been around for twenty-five years, that doesn’t mean all the personnel have as much experience. You never know how frequently the personnel rotates so make sure to check the company’s credentials as well as the team who will be doing the work for you. Of course, you also need to see what equipment they have. If they are still using manual bending techniques – though it will be quite unlikely – then you probably want to look elsewhere if you have thousands of units that need to be shaped. On the other hand, if they have state of the art CNC tube bending equipment, then you should be quite satisfied with the results. Also check their turnaround times. If this is a shop you haven’t worked with before, it’s best to discuss turnaround times in advance. Usually shops outfitted with CNC equipment can deliver quite quickly, but you never know how many clients they have in queue, which is why it’s best to ask first. Also, don’t simply go on their word. Ask to see examples of their work and even request references. And you should check up on those references. Of course, any company that is going to invest in a wide range of expensive equipment is likely to know what they are doing. However, once you’ve found a good tube bending service, you really should stick with them. As we’ve said, precision, accuracy and quality are vital when it comes to tube bending, which is why you should only stick with the best. It will mean fewer expenses and certainly less stress for you. A good tube bender will also be able to provide you with advice on the most cost-effective, efficient solution for your particular case. Of course, if you already have your specs, then you’re good to go but it never hurts to confer with a professional as their advice could translate into a fortune saved. Tube Bending services are all out there but be sure you do your homework of checking out different metal bending services in Australia first before jumping right in. Bendpro has been servicing clients from all over Australia for more than a couple of decades now. You may visit www.bendpro.com.au for some useful info.
Related Articles -
tube bending, tube bender,
| 
