Each set has a precipitator of this drying equipment parts, in order to make the dust collector in the dryer on the successful application of flue gas must adapt its structure, some properties outlined the following points on the nature of for your reference. Are: 1 Although the design of normal operation of the cement equipment flue gas temperature is 120 degrees or less, but the raw water large, poor mobility, shed positions broken material often happens, once shed positions occurred off material, ventilation control not timely, then the temperature of tball mill equipmenthe flue gas will soon rise. (2) adapt to high moisture, high dew point, has a hydrophobic filter to the line to ensure that no paste bag, easy to remove surface dust; housing have good insulation, ensure that no internal condensation; discharge device lock wind performance is better to avoid too much cold air leakage into the cause local condensation, the same parts to be welded to prevent leakage welding and vulnerability; 3 hot and humid environment because there exists a certain amount of sulfur dioxide; filter bag material and equipment tables corrosion, must adapt with them, iLightweight Concreten order to ensure life. 4 high humidity due to gases, dust may accept big water, poor mobility, in order to ensure the smooth discharge, hopper elevation in office, equipment specifications ash silo wall vibrator selection and configuration is done targeted considered.
Related Articles -
Each, set, has, a, precipitator, of, this, drying, equipment, parts,
|