|
You need several varieties of machines and tools when you manufacture garments at the large scale. It is impossible to carry out the stuff manually as it is time-consuming and less productive. Amongst the popular devices that bring high levels of automation in the garment manufacturing process, fusing machines for garments are considered very important. These machines hold the fabric and interlining on the conveyor belt. As the best gets heated, the interlining and fabric get attached firmly. The accuracy of temperature and right alignment are important factors to determine the quality of manufacturing. When you buy these machines, make sure it is the best in the class. Poor quality of fusing machine results in poor quality of garments. Daily maintenance keeps the machines healthy Even if you buy the best and the most expensive fusing machines for garments; it can’t produce top-class products if you do not maintain it well. Experts recommend daily checking of the machine before you start production. Typically, the pressure on the three rollers (left, center and right) should be checked. Manual checking process can be used for detecting it. You should take a lightweight strip of woven fabric. Let it pass through the heat press machine by holding the other end tightly. As the end passes through the rollers, the strip should be pulled to feel the pressure. Adjust the pressure if you feel it extraordinary high or inadequate. Preparing the machine It is a sophisticated machine. Hence, you should spend some time in preparing it for the production. When the machine is installed, you need the baseline setup. Refer installation manual provided by the vendor. Adjust pressure and temperature as per the data sheet. Check the availability of thermometer and thermal paper. The temperature should be measured twice a day (typically before and after the lunch break). Perform bond test to know the strength of the machine. Here are some important checkpoints • Physical condition and pressure of the pressure roller • Check temperature by using the thermal strip • Check all electrical connections • There should be solid state relay switches for this machine • Operators must wear protective gears such as gloves, visors and aprons • One should not operate it until it becomes completely stationary • Operators should not use fusing machines for garments if they feel sleepy or tired • Do not touch the chamber while the machine is on Go for the best fusing machine for garments industries, who can offer both single bed and double bed fusing machines with high performance.
Related Articles -
fusing machines, double bed fusing machine,
| 
