Manual Gun System With Faster Coating Mitsuba's Multistatic Series 700 HF uses a special high flow pump which increases powder flow by 25% to 35%. The electronic charging system is enhanced to provide proper and superior charging to the higher powder flow. This system is ideally used to coat to higher conveyor speed for enhanced productivity. Manual Powder Spray Infiniti Corona Gun guarantees 100 KV at Gun Tip for the entire life of the gun, thus maintaining the continuity of best result throughout its life. The entire range of nozzles provided with the system assures prefect powder coating even in deep or remote areas which are difficult to coat. This maintains the highest transfer efficiency. Patented Infiniti™ technology (US Patent No. 5678770) protects your powder coating gun against any failure. There is no breakdown & no expensive repairs. All you need is to replace the barrel in the event of power Complete control in your hands with Smart Tracker diagnosis system. This locates any problem instantly and the problem can be rectified by you. This minimizes the downtime and external dependency. The system is approved as per the new European ATEX regulations. The equipment includes a 3 piece stainless steel hopper in a special easy dismantle design. This allows for perfect cleaning during color change operations. The entire system is trolley mounted for convenient handling. 1. Manual Powder Spray Infiniti Corona Gun 2. Stainless Steel powder hopper 25 Kgs 3. High flow Powder pump output 045 kgs/hr 4. Equipment Standard Trolley 5. All accessories for startup. Optimum Input Pressure : 6 bar Max water vapour required : 1.3 g/m³ Max oil vapour required : 0.1 ppm Maximum air consumption : 13.2 m³/hr Single phase AC : 220V or 230V / 110V Temp Range : +2°C to 50°C Output Voltage :100KV DC Output Current :100 A
Related Articles -
Powder Coating Machine, Powder Coating Equipment,
|