When choosing a fastener company, you might want to check out their wide selection of fasteners available. Depending on the type of job to be assembled and the size of the project, there will always be a perfect fastener to help you get the job done including the most basic; screws, nuts, bolts, rivets, or other materials that may be needed. Screws Screws are sometimes referred to as threaded fasteners. They are designed with what is called a mating thread hole in the job to be done. Once the screw is threaded into that particular hole, it creates a very tight seal that is very difficult to break. The screw actually becomes one with the materials it is fastening together. Screws come in different head types depending on the type of tools you will need to do the job. Hex head screws are able to handle a lot of torque, while a button head screw is designed to not snag on anything when the finished product is in use. There are also flathead screws to align flush with the material and Allen Head screws that will allow for even more torque than the Hex head screw. Bolts Bolts work on the reverse side of the screw in the same threaded fashion. They are designed to be secured by a nut after it has been threaded into the hole. Screws are threaded in from the front of the material while bolts attach to the screws on the opposite side to keep the screw from unthreading from use. How to Measure Both screws and bolts are identified by pitch (that’s the number of threads per inch), length, or head shape. When trying to choose which type of screw you need for your particular job, you will need to measure these three features of each fastener to choose which type will fit your particular project. There is no question that the world of fasteners has changed tremendously over the years. In times past, there were quite literally only one or two different types of fasteners to choose from. Today, however, that has made an amazing change; not only do you need to understand all of the different types of fasteners on the market today but also the types of tools you will use to install them and the size for each hole. With all the different choices that a good fastener company has to offer a manufacturer, there is no shortage of creative fastener ideas to get their jobs done in the fastest and securest way possible. For more information, please visit http://crestfasteners.com/
Related Articles -
fastener, company,
|