Boat Export USA is professional trader following one concept “All Inclusive” solutions for boat shipping worldwide. We are online boat traders where you can buy used USA boats from our wide range of boats, can sell your used boat or buy a new one by following our five simple steps of boat export process. Specific Shipping methods are being followed by us in order to have an economical boat transport with safety and no damage. -When a boat is too wide to be rolled straight inside the shipping container shipping, container boat shipping method is used. Here boat is being turned on its side and safely loaded inside a 40' HC container using tilt method and custom made shipping cradle. Fuel, oil, water are drained, tops, windshields are removed if needed, batteries disconnected. If your boat has a beam of less than 8’6” or (102') (2.59 meters), and is less than 36' in total length, this method stands out with more cost effective solution than any other method as more than one boat can be placed inside a shipping container. Shipping American used boats with a beam larger then 7’8? wide has always been difficult, but we have overcome this problem by fabricating a steel cradle that is fitted to match your boat specifications and loading boat into the container on a certain angle. This results in arrival of your boat safely without any damage. -Another method used which is known as Ro-Ro (Roll-On/Roll-Off) shipping method, when the boats are rolled while on their trailers on and off the ship. Over sized boats loaded on special flatbed and to reduce shipping size, arches, radars and towers are removed. Shrink wrap-protection film is used so as to protect boat in transit. -When boat is too large for trailer or to fit either container or Ro-Ro feeder’s door opening like larger power USA boats and yachts Lo-Lo (Lift-on/Lift-Off) yacht shipping method is used. We manufacture custom made shipping cradle. This method is higher in rates because the USA used boats are being loaded safely on the deck of the ship using port cranes, forklifts and derricks. Here also shrink wrap protection is being used. -Last but not the least another method used for shipping is flat racks boat shipping method. Here the boat is loaded on a flat rack and then strapped and secured to the ship depending on the American boats which are large oversized and the destination port. We owe you with our exclusive express services at fraction of the cost and assuring you no money down. About The Author:- This article is written by boatexportusa.com where you can get latest information on American used boats, Used boat sales to Australia, boat sales and many more, which are more demandable now a days. For more updates or details follow us on twitter at https://twitter.com/boatexportusa
Related Articles -
Boat, Export, USA,
|