|
To view the first fuel supply system, on the instructions from the fuel gauge shows the fuel pressure is normal. Rendered flame began a few times when concrete mixing station manipulator show illnesses code for 6EF, look-up table that reason is the high frequency troubling problems. Thus, according to the items listed in the table view of the photoelectric sensors, fan and solenoid valve shield line to view, but not abnormal. Henan Daswell Machinery Co., Ltd,is a professional manufacturer and trader specializing in the research, development and production of construction machinery for nearly 30 years. Our main products are as follows:diesel concrete mixer, concrete batching plants,concrete mixer,blocking making machine,concrete pump,etc. Then for all electrical controls are carried out some view, were not unusual. Therefore, the device again into load operation, with the emphasis on the output of the generating units investigated the power supply voltage, frequency changes. At the moment found turbine at maximum load conditions, when every frequency down to 46Hz boring tube heater that is stalled, so problems can be concluded that the generator set composition. Later, the other a regular starter generator sets, the results all normal. Visible defects in the band when the turbine speed is too low load operation constituted. After a check that the generator speed is low due to high-pressure diesel pump governor caused by wear and tear, so job with a load generator speed is reduced concrete pump for sale, when it is at maximum load, the frequency dropped to normal operation control device R7241 scale In addition, at the end lead to the heating system flameout. Stabilized soil mixing station which is heated asphalt concrete mixing plant system illnesses brief sweep approach.
Related Articles -
concrete batching plant, hzs type concrete mixing station,
|
