This section will show you how to install software of DigiMaster 3 as well as how to connect it with your PC 1.Installing D3 Tool Setp 1: Double-click the installation files in the CD. Step 2: Choose the route of Installation Step 3: Open the software interface as below after installation 2.Connect the DigiMaster III with PC and internet Step 1: Connect the D3 USB with PC. Click "Cancel" after the window bombed as below. Step 2: Click "OK" to close the bombed warning dialog. Step 3: The below window will appear after successful connecting with device. Step 4; Just reconnect the USB cable if the USB connecting is cut showed as below window Notice:Insert the connector of LAN cable into RJ45 LAN connector of D3 to make online update. 3.Remote Assistance Our engineers will provide you on-line technology support via internet when you choose long-distance assistance function. Step 1: Please contact the Sales from my company to obtain an IP before the Remote Assistance. Then connect your D3 with internet. Step 2: Open D3 Tool software to enter"Remote Assistance", then choose "Require Remote Assistance". Step 3: Input the obtained IP and click "OK" in the bombed window
Related Articles -
Digimaster, 3,
|