|
Flotation machine instructions and wearing parts prepared statement flotation machine use and maintenance: If you drive (1) Rotate the stirring mechanism Ceramic Ball Mill triangular pulleys, shafts and controllable surface scraper structure adjustment mechanism handwheel, check all moving parts flexibility. (2) Check the refueling point, according to the requirements of a variety of lubricating grease injection. (3) non-falling into the tank bolts and cotton, silk and other shaped objects. Ceramic Ball Mill Before driving should be carefully examination, especially check the fake underneath, otherwise it will cause a major accident, to break the impeller and the stator. Driving after (1) Check the impeller rotation direction (looking down from above should be clockwise). Scraper rotation directionCeramic Ball Mill (Ying scraping direction groove in vitro ore concentrates chute), check the each rotating parts presence or absence of China Chang phenomenon. (2) idling normal after feeding. Adjustable dosing, slurry from the mixing tank into the first chamber, through gate in turn each chamber is filled, regulate the water level flotation. (3) after the operation check the various electric motor and stirring mechanism's bearings, scraping bearing seat Ceramic Ball Mill temperature rise of the shall not exceed the 25 o C. (4) every three months to the agitating institutions and the scraper deceleration motor commutation once a oil Scraper bearings should be an oil each day. (5) Parking ago Ying stop giving material and the turn off doser. (6) such as parking time is longer, then hit the open mine valve to tank slurry discharged. Flotation machine technical parameters Model Effective Capacity m3 / Slot Impeller diameter mm Impeller speed r / min scraper speed r / min stirring motor kwXJK0.130.1320060017.51.1XJK0.230.2325050017.51.5XJK0.350.3530047017.352.2XJK0.620.62350400163XJK1.11.1500330265.5XJK2 .82.8600282611 replacement of wearing parts flotation machine: This machine is mainly wearing parts, the impeller and the stator, through long-termCeramic Ball Mill operation and wear, the impeller and stator blade profile is not complete, can not guarantee that the gap should be replaced when the impeller and the stator Otherwise, it will affect the flotation results. Consumable equipment table (slot meter) No. Name Type Quantity Remarks 1 impeller XJK1 2 cover XJK1 4 stirring Ceramic Ball Mill motor Y100L-4 3KW 1 5 narrow triangular-shaped belt type B L = 2 common models 6 Tapered roller bearings 73111 7 plain bearings 3111
Related Articles -
Ceramic, Ball, Mill,
| 
