|
(1)Three-phase power to stabilize between 380V ± 5%, wiring fastening. (2)Electrical connection you want to check the main href="http://www.dwmixers.com/products/concrete-mixer-pump/hbt15/jzm350-concrete- mixer-pump.html">pump motor steering motor can not be reversed (the tail from the motor to the direction of the main oil pump the clockwise) general control cabinet energized, phase sequence protection red and immortal is reversed. Phase Sequence protection red and a second later off, it is not reversed. (3)Before open the machine checking oil tank level, the pipeline leaks. Note Grease activities point for oil (As the case is generally twice to each class note) (4)"enhance the decline," stirring the material "," water supply "," vibration "switch with the corresponding action is normal. (5)The pump is started and should be continuous motor start button and immediately press the "motor stop" button and stop thirty-four Times, to take advantage of the motor inertia starter. (Abnormal sound should identify the reasons for processing and then start) (6)Arrange pipe (7)The pump is started after the buck started to wait for the Y-? start the conversion to start pumping work, did not drop The pressure to start the motor to start fifteen seconds to start the pumping work. (8)The work always pay attention to the pressure of the tables.
Related Articles -
concrete, mixer, with, pump, work, principle,
| 
