|
Due to a lifespan averaging 15-20 years, the control room design is potentially the most critical aspect when conceptualizing a control area. Various aspects need to be reviewed during this stage to avoid poor design elements that may not be rectifiable after installation. Successful designs must allow for expansion due to predictions as to increases or changes in the workload. The assessments as to the area available for implementing of the control rooms need to be away from noisy areas and too much traffic thoroughfare. Windows ought to be strategically positioned so as to avoid possible glare on the display screens, resulting in erroneously read displays. Large windows must be avoided, except where it is used for visual control and similar purposes, so it may require a light tint. Each aspect of the nucleus is geared at safety correlated issues, as several numbers of external influences or improperly placed controls could wind up causing fatal consequences. Entrance and exit doors must be carefully located to guarantee not to divert the operator, be big enough to permit trolleys to go through unhindered, sufficient security procedures are to be included here. Numerous emergency exits need to be allocated in accordance with regulations. Arrangement should be contributing towards teamwork, with spoken contact being achievable among workers. Areas ought to be spacious and supplementary space must be allocated for several additional employees that may be working in the space on occasion. Supervisory staff should be placed in suited areas so as to oversee the entire workings. Added safety procedures include a guard or hand rail, for upper levels or walkways. Ramps for wheelchairs or disabled facilities will also have to form part of the overall access of the facility. People ought to have the ability to amend postures while working to avoid any underlying health issues from occurring. Maintenance is the subsequent area of concern, as easy access for repair personnel needs to be put in place; typical guidelines are recommended based on prior experience. Rear entrance panels are suited; with workstations suggested to be positioned in the region of 700mm above floor level, to make provision for a technician to fit underneath. Enough room for the operation of heavy machinery or large equipment for repairs needs to be incorporated. Instantly recognizable space functionality, such as relaxation stations and bathrooms, positioned near the prime entrance and exit areas. Well thought out controlled access areas, with a suitably designed tag system at an easily controlled section of the room. Emergency exit plans needed to be mapped out allowing quick access to emergency exits. Past experience has also proven that when the rooms are designed in a circular formation, hexagonal or square the end control room design appears to function better. Sufficient ventilation and suitable lighting will also help the overall work flow to run smoothly. Preliminary design drawings must also show future growth abilities and flexibility with in the present plans. You can find phenomenal control room design ideas by visiting our official website. To find out more about our products and services or to view project examples, click the links at http://fountainheaddc.com/noc-furniture-consoles.html today.
Related Articles -
control room design, noc furniture,
| 
