Heating and air conditioning Orland Park IL is a system designed to control the indoor environmental temperature for the comfort of the occupants. This system is controlled with a thermostat that regulates the temperature through the ventilation system. The heating source, usually a natural gas or propane fueled furnace is the most common used appliance that is used for heating. The furnace heating source utilizes the ventilation system to evenly distribute the heated air to all areas of the structure. The air conditioning system utilizes the same delivery system as the heating system, the ventilation system. This is the system that is most often overlooked. Since this duct work is pulling double duty, this is an overworked, under maintained system. For an efficient and energy saving system it is wise to do an annual inspection of the duct work. This is a rather simple procedure to do, start at the furnace and follow the duct work along its route. Check to make sure that all joints are properly place and there are not gaps in the joints. If you discover a disjointed place, look inside to see if the duct is clean and free of debris. If it is not either clean it out yourself or call for a HVAC Orland Park IL ventilation service to clean your system. Re-tape the joints and continue to check your system. Clean out the floor or ceiling registers regularly to remove any dust pet hair and small objects which may impede the proper air flow. In addition clean the return air vents to make sure they are also free of dust and objects blocking the vents. Also make sure that there is nothing obstructing the flow of the heated or cooled air coming out of the register such as furniture or draperies. Another area to inspect for lost heating and air conditioning Orland Park IL is the windows. If you feel a draft at the windows, you are spending money and energy to heat or cool the outside. Of course window replacement is the obvious answer but if that is not in your budget there are other options available. Caulking will seal the seepage around the windows and doors. If the windows are not fitting properly due to the house settling, you can seal off the windows with a plastic covering. Using a clear plastic to secure over the window will not be as attractive as new windows, but will cut down on your lost energy. With the lower energy bills you might be able to replace your windows with the money saved by using less fuel. Another great expense with lost energy is around the doors. Each time a door opens it allows the transferring of hot for cold or cold for hot air. You cannot stop opening your doors but you can make sure that there is proper weather stripping to help reduce the cold or heat entering your home. One older home had the door molding so badly beat up that replacing the molding solved the problem. Make sure that the furnace filters are changed or cleaned each month. Neither heated nor cooled air can flow freely through the dust that accumulates on the filters. This will increase your performance of your heating and air conditioning Orland Park IL system. Annual inspections and tune-ups are highly recommended from the experts of heating and air conditioning Orland Park IL. This service helps to keep your system running in an efficient and energy saving manner. Since the United States Energy Department reports that 56% of your energy bill goes for the cost of heating and cooling your home; finding ways to increase the use of your money spent each month is a good investment.
Related Articles -
heating, and, air, conditioning, orland, park, il,
|