|
One way that you can really spruce up your house without busting your budget is with laminate flooring. If you are wondering how to install laminate, then you need to be able to follow some simple directions. As long as you have the proper tools which will include a saw that is used to cut the flooring to fit the floor as well as the materials that are needed like underlay, then you are all set. If you have been looking to learn how to install laminate, then follow these simple instructions: The first thing you need to do is to choose the right laminate flooring style that suits you. There are many different styles from which to choose and many of them look like real wood. In fact, it can be difficult to tell hardwood from this type of flooring and many people today prefer the look of laminate because it is easy to keep clean. Take a look at the various styles that are out there and choose one that will suit your taste. The next thing that has to be done is to measure the area. The area should be measured carefully as you are going to want to be sure that you have enough of the materials. The old adage to measure twice and cut once applies here although in this case, measure twice and then order. Be sure to order the supplies such as the glue and underlay when ordering the floor as these are an essential part of installation. You cannot install the floor without the underlay and for best results, you want to put this on top of plywood. Remove anything in the area that will encumber the installation. If you are installing this in the bath, then be sure to remove the toilet and vanity before embarking on the installation process as this will make it much easier to cut around the area. After you install the underlay, you can then start to work on the floor itself. This will be the least amount of cuts as possible as you do not want to cut too much. Start in the center of the floor and then work your way out. It is always best to start in the focal point of the floor when you are installing tile or flooring because the room may not be totally square and you are going to want to minimize that in the corners and ends. After you have measured and have laid out the floor, it is then time for you to glue the pieces together. There are also spacers that can be used for this type of flooring installation and they will help when the floor settles. A laminate floor will settle after it sits for a while so you want to be sure that you use the spacers so it does this evenly. Once the floor is properly glued down, you can wipe off excess glue and let it sit for at least twenty four hours. Once the floor has been set, you can do the trim work around the floor to finish it off. Resource: If learning How to install laminate , take it step by step and measure carefully, using the right tools. To find Laminate flooring go to Top Floorings.
Related Articles -
How to install laminate, Laminate flooring,
| 
