|
|
|
Mitsubishi introduced the shoulder with a multi-axis mills by na b
|
|
|
Mitsubishi introduced the shoulder with a multi-axis mills by NA B
|
|
Article Posted: 05/19/2011 |
Article Views: 111 |
Articles Written: 2638 - MORE ARTICLES FROM THIS AUTHOR |
Word Count: 563 |
Article Votes: 0 |
|
Mitsubishi introduced the shoulder with a multi-axis mills |
|
|
|
Business,Business News,Business Opportunities
|
|
High speed, low rigidity, low prices Machining Center Is the production of high value-added products (ie, high precision, high quality products) the main machine, it requires Cutting Tools Small cutting resistance, cutting high precision machine tool in a low rigidity for efficient processing. To meet this demand, Japan's Mitsubishi Materials developed APX3000 based cutting simulation model with multi-shaft shoulder stand Mills .
Now, APX series further expansion, they have put a greater machine clip blade size and depth of cut can increase the amount of APX4000 type with multi-axis mills shoulder.
1APX4000 characteristics of type tool (1) APX3000 maximum cutting depth is 10mm, while the APX4000 maximum depth of cut of up to 15mm, blade thickness is about 1.4 times to APX3000, blade strength further.
(2) low cutting resistance, high rigidity and shape of cutting edge
APX4000 and APX3000 as to reduce the cutting resistance, the various measures taken. In order to chip away from the rake face, APX tools have raised the shape of the rake face off chip sets, 32mm cutter before the angle of the maximum radial +23 °, before the angle of maximum axial +25 °; to improve the scheduling chip performance, cutting edge design into the convex shape; to reduce the contact area with the chip, using a two-stage front, lower cutting resistance; flank design spiral surface, improved wear resistance of cutting tools.
APX4000-type knives and other companies comparative test resistance to cutting tool (cutting conditions: Workpiece material: SCM440; cutting speed: 160m/min, depth of cut: 13mm, cutting width: 16mm, feed rate: 0.1 ~ 0.3mm / tooth ; dry cutting) results show that: A company's low cutting resistance of chip-breaker and APX4000 cutting resistance minimum, cutting good.
Anti-chipping performance comparison test (Cutting conditions: workpiece material: S55C; cutting speed: 160m/min, depth of cut: 10mm, cutting width: 10mm; dry cutting) results show that, due to the cutting edge and high-performance spiral coating composition, and A, B Product Comparison, APX4000 type shaft shoulder milling cutter with a small cutting resistance, excellent wear resistance of cutting tools.
(3) high wall precision APX4000 type Milling cutter with shaft shoulder wall (cutting conditions: Workpiece material: SCM440; cutting speed: 160m/min, the depth of cut: 13mm × 3 plays, cutting width: 10mm; dry cutting) and high precision. When the cutting depth of 13mm, the wall bump peak of about 0.03mm.
(4) the folder does not re-sharpening machine film coating
And APX3000 as, APX4000 efficient use of two coating materials VP15TF and VP20RT. Which, VP15TF is widely used general-purpose coating, VP20RT is dedicated milling stainless steel mold coating. In the process of representative SKD11 (HRC50) Comparison of the mold test (cutting conditions: Use Machine: BT50M / C (BT50); workpiece material: SKD11 hardened steel (HRC50); cutting speed: 80m/min, feed rate : 0.07mm / tooth, cutting depth: 10mm, cutting width: 8mm; single blade dry cutting) results show that compared with other products, APX4000 the tool life can improve about 25%.
APX4000 cutting patterns can be used for a variety of milling. In the shape of knives, some blade diameter greater than the diameter of the blade shank offset mount cutter body, the maximum length of 260mm, can process the deep cavity. I am China Auto Suppliers writer, reports some information about rooster weather vane , shredded rubber mulch.
Related Articles -
rooster weather vane, shredded rubber mulch,
|
Rate This Article |
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
Reader Opinions |
|
|
|
|
|
|
|
|
Author Login |
|
|
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|