|
|
 |
|
|
Tiger blades of the engine by na b
|
|
|
Tiger blades of the engine |
|
|
|
|
|
Business,Business News,Business Opportunities
|
|
Tiger Blade (Tiger · tec) was developed by Walter Limited specializes in processing cast iron carbide coating with a new blade. As we all know, most of the engine cylinder made of gray cast iron. Before the appearance of the tiger blade, process to ensure the stability and processing efficiency, many engine manufacturers are using ceramic blades for processing cylinder. MAHLE is a company specialized in manufacturing motorcycle engines, they also think that carbide cutting tools is difficult to meet their processing needs. They cylinder bore similar HT250 (their internal grades to Niresist) of gray cast iron, rough boring process of aperture 80mm, hole length of 150mm. 2mm in the side margin for the processing of crude boring, boring use of dedicated two-edged sword, and a company's ceramic blade SNGN120712SL500 (control of cutting force as the need, they sometimes use SNGN120716 blade), processing of the tool life of 70 a workpiece. Supply their ceramic blade that company is the European ceramic blade technology leader in the ceramic tool has a very high competitiveness.
2000, Walter local engineers recommended to them tiger blade SNMA120416WAK10, their surprise happened. Although the tiger blade cutting speed 375m per minute, compared with ceramic blades for cutting speed 500m per minute, slightly lower, but the feed rate of 0.2mm per tooth from ceramic blade of each tooth to 0.27mm, the processing efficiency than the ceramic blade slightly higher (1.25%). Under such conditions, the life of Walter tiger blade can also be stable at 70, sometimes even to 80, can be compared with the ceramic blade, it is no less respect in life. At the same time as higher than the toughness of cemented carbide inserts nitride ceramics, the tiger had not occurred since the blade's edge are often broken collapse phenomenon, MAHLE processing staff no longer need to conduct a regular closely monitored. As the price of tiger blade is much lower than the ceramic blade, MAHLE tiger blade in use after the obvious economic benefits. Tiger in the use of Walter's blade before they process each year for the purchase of the blades cost about 51,000 euros, and when using tiger blade, they process the blade of the cost of processing has been reduced to 40,700 euros, a fall of over 20% . Through this technological revolution, MAHLE company not only directly reduces the cost of procurement tools to reduce the processing of the risk of broken cutting edge collapse, but also reduce the variety of tool (no longer need two different nose radius), and because Canada large corner radius and also enhance the level of surface roughness to reduce the following process of grinding time.
For the original use of carbide blades for processing cast iron engine parts, tiger blade can often make the engine manufacturer's production efficiency improved significantly.
Tiger Blade (Tiger · tec) is Walter Co., Ltd. specially developed processing cast iron blade with a new type of hard alloy coating. As we all know, most of the engine cylinder made of gray cast iron. Before the appearance of the tiger blade, in order to ensure the process stability and process efficiency, many engine manufacturers are using ceramic inserts for machining cylinder. MAHLE is a company specialized in manufacturing motorcycle engines, they also think that carbide cutting tools is difficult to meet their processing needs. They cylinder bore similar HT250 (their internal grades to Niresist) of gray cast iron, rough boring process of aperture 80mm, hole length of 150mm. 2mm in the side margin for the processing of crude boring, boring use of dedicated two-edged sword, and a company's ceramic blade SNGN120712SL500 (control of cutting force as the need, they sometimes use SNGN120716 blade), processing of the tool life of 70 a workpiece. Supply their ceramic blade that company is the European ceramic blade technology leader in the ceramic tool has a very high competitiveness.
2000, Walter local engineers recommended to them tiger blade SNMA120416WAK10, their surprise happened. Although the tiger blade cutting speed 375m per minute than the ceramic blade cutting speed 500m per minute, slightly lower, but the feed rate of 0.2mm per tooth from ceramic blade of each tooth to 0.27mm, the processing efficiency than the ceramic blade slightly higher (1.25%). Under such conditions, the life of Walter tiger blade can also be stable at 70, sometimes even to 80, can be compared with the ceramic blade, it is no less respect in life. At the same time as higher than the toughness of cemented carbide inserts nitride ceramics, the tiger had not occurred since the blade's edge are often broken collapse phenomenon, MAHLE processing staff no longer need to conduct a regular closely monitored. As the price of tiger blade is much lower than the ceramic blade, MAHLE tiger blade in use after the obvious economic benefits. Tiger in the use of Walter's blade before they process each year for the purchase of the blades cost about 51,000 euros, and when using tiger blade, they process the blade of the cost of processing has been reduced to 40,700 euros, a fall of over 20% . Through this technological revolution, MAHLE company not only directly reduces the tool procurement costs, reduce processing risk of broken cutting edge collapse, but also reduce the variety of tool (no longer need two different nose radius), and because Canada large corner radius and also enhance the level of surface roughness to reduce the following process of grinding time.
For the original use of carbide blades for processing cast iron engine parts, tiger blade can often make the engine manufacturer's production efficiency improved significantly. I am an expert from Components Electronic suppliers, usually analyzes all kind of industries situation, such as turtles red ear , puppy training biting.
Related Articles -
turtles red ear, puppy training biting,
|
Rate This Article  |
|
|
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
| Reader Opinions |
|
|
|
|
|
|
|
|
|
| Author Login |
|
|
 |
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views
|
|
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
|
|
|
|
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
|
|
|
|
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
|
|
|
|
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
|
|
|
|
SUSAN FRIESEN
Located in the lower mainland of B.C., Susan Friesen is a visionary brand strategist, entrepreneur, ...more
|
|
|
|
|
STEPHEN BYE
Steve Bye is currently a fiction writer, who published his first novel, ‘Looking Forward Through the...more
|
|
|
|
|
SHALINI MITTAL
A postgraduate in Fashion Technology. Shalini is a writer at heart! Writing for her is an expression...more
|
|
|
|
|
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
|
|
|
|
JAMES KENNY
James is a Research Enthusiast that focuses on the understanding of how things work and can be impro...more
|
|
|
|
