|
What is a hot wire cnc foam cutter used for? Hot wire foam cutters will cut different types of foam, from insulation to fabrication, from logos, surfboards and signs to crown moldings and concrete molds Hot wire foam cutters are designed to cut different types of foam 1. EPS – expanded polystyrene 2. XPS – extruded polystyrene 3. EPP – expanded polypropylene Not to be used for cutting polyurethane – will result in toxic fumes What are the main components that a foam cutter is made of? 1. The software is divided into two sections – design software to design the shapes to be cut, and the cutting software that controls the machine 2. The hot wire tensioning mechanism 3. Effective cutting sizes for the horizontal, vertical and the wire length 4. Number of axis – a 4 axis machine will be able to cut tapered shapes (like a cone or a jet wing) Here are some features to look for in a hot wire foam cutting machine: For production of crown molding: 1. Multiple wires – from 3 to 8 wires will increase the cutting capacity from 2 to 7 times 2. 8 foot effective wire length – don’t settle for a 4’ machine 3. If primary use of the machine is to cut logos and signs – a smaller machine will do the job 4. Cutting speed – mostly material dependent – as a rule of thumb: the higher the foam density – the slower the cutting speed Foam cutting machines have many applications. They can be used to cut architectural shapes, for packaging, building, construction, hobbies, RC Planes, sculptures, monuments, theme parks, props, aeronautics, aerospace and much more. Hot Wire CNC Foam Cutter prices: CNC foam cutters will range from $1500 to $50,000. The price is a factor of the machine size, the number of wires, the way the wires are kept under tension. Other foam cutting machines: Another way to cut foam is with a CNC router – this is mainly for machining the foam and not for cutting. CNC routers for foam are mostly used for 3D shapes seen in Las Vegas, theme parts and even signs Foam coating: EPS and XPS will melt if painted with oil-based paint. Painting is composed of two steps: 1. Preparing the foam for coating – a primer should be used to prevent the coating material to penetrate the EPS beads 2. Coating – Coating is usually Epoxy (usually brushed) or Polyurethane (brushed or sprayed) Once the foam is coated – it can be painted with any type of paint. If interested, you can even build your own cnc hot wire foam cutter. Just visit www.8linx.com and www.foamlinx.com to learn step by step how to build a cost effective machine and the types of foam cutters you might need.
Related Articles -
cnc, hot wire, foam cutter, wings, RC, low cost, hobby model, foam cut, eps, xps, epp,
|
